Intelligent Quarter-turn Electric Ball Valve Actuator

ELECTRIC VALVE ACTUATOR

PRODUCT FEATURES

• Q type electric valve actuators are suitable for butterfly valves, ball valves etc, which are required to turn 90°. These actuators are featured by small size, light weight, high efficiency, high reliability, high protection capability, low noise and so on. Both operation at site and remote controlling can be carried out. So they have been applied in petroleum and chemical industries, power plant, water treatment and paper-making industries.

• Freya controls designs, produces and provides high-quality actuators and services related to valve automation.

• With our many years of experience in the field of automation, we have launched the Q series of electric actuators, which are compact, rugged, reliable and can be fully integrated into complex control systems.

• We are always ready to provide you with our Q series actuators and accessories as well as quality services.

• Compact and robust construction, lightweight.

• Wide range of torque variation (From min 50Nm to max 5000Nm).

• Hard anodized aluminum housing inside and outside with external high temperature paint coating for use against severe industrial environment.

• Enclosure uses radial seals & O-rings that provide protection to waterproof IP67 and optional watertight lP68.

• lSO5211 standard.

• Removable drive bushing for easy machining and mounting.

• Self-locking provided by double worm gearing (no brake required).

• It automatically identifies and corrects phases. Automatic phase failure protection protects equipment safety.

•Reliable mechanical torque sensing system providing safe operation in overload condition.

• Large size window and indicator provides better position indication from a distance.

• Number of local position control options to provide easy commissioning and field operation.

PRODUCT STRUCTURE

1 Integrated control unit Non-sunk switch button is adopted to ensure complete waterproof function. The built-in circuit board has a reliable power isolation from external interference signals by optical isolation elements. If there is an over-torque switch induction, for the safety of the motor and valve, the actuator will refuse to be sensed by other sensors before the operator inputs the home position (RESET) button.

2 Selection of control mode

The selective switch "Remote"-"Stop"-"Local" installed on the local operating device can be used to set up remote operation (remote control) or local operation (local control) or stop mode.

3 Local electric operation

The operating switch "Open"-"Close" installed on the local operating device can be used to open or close actuator locally.

4 Motor

The valve-specific motor that can be disassembled independently has the characteristics of high starting torque and small inertia. The squirrel cage induction motor with embedded thermostat. The built-in thermostat accurately detects the increased temperature to prevent form motor damaging.

5 Electric operation

The motor drives the electric worm through a first-stage spur gear pair, and the worm drives the eccentric shaft to rotate through the copper worm gear combined with it. This reduction gear structure has self-locking performance, when the motor stops, the valve will be locked in position.

6 Stroke control, torque control and opening indicating mechanism

Stroke control It adopts a cam mechanism, the cam shaft is synchronized with the output shaft and two micro switches are respectively set in the opening and closing directions.The upper end of the cam shaft is equipped with a dial to indicate the valve position. Torque control The electric worm is equipped with a butterfly spring group, the axial movement of the electric worm is proportional to the output torque of the output shaft, and the movement of the worm is converted into the rotation of the torque shaft through the rack and pinion structure. A cam is installed on the torque shaft, and a microswitch is provided correspondingly in the direction of opening and closing.

7 Manual operation

When the handwheel is turned, the manual worm drives the outer gear of the fixed ring gear to rotate, and the inner gear of the fixed ring gear and the planetary gear form a fixed-axis gear train to drive the output shaft to rotate. Therefore the manual and electric operation conversion of the actuators is completed through the role conversion of the static ring gear. There is no clutch, and there is no need to switch the handle to achieve fully automatic switching.

8 Terminal box

The independent sealed terminal cavity can ensure the sealing integrity of the electrical part of the electric actuator when performing on-site wiring, and at the same time meet the product explosion-proof requirements.

9 Mechanical limit

There is an adjustable limit screw in each direction of opening and closing. A special sealing gasket is installed on the limit screw to ensure good sealing performance of this part.

FIELD CASES

PRODUCT ACCESSORIES

STANDARD SPECIFICATIONS

TECHNICAL DATA

Note：

1. Under the rated voltage, the ratio of the jam current to the rated current of the motor is 7, and the tolerance is +20% of the guaranteed value

2. lf there are special requirements, the company can provide other speeds: 0.25/1/2/3/4 (r/min), etc.

DIMENSIONS

CONNECTION DIMENSIONS

CONNECTION DIMENSIONS

FACTORY

Hot Tags: Intelligent Quarter-turn Electric Ball Valve Actuator, China, manufacturers, suppliers, factory, buy, price, quotation, Modulating Valve Actuator, Motor Operated Butterfly Valve, 4 20ma Valve Actuator, Part turn Butterfly Valve Actuator, Angular Travel For Rotork Actuator, Linear Electric Actuator For Rotork