Description

Send Inquiry

SD series electric actuator

SD intelligent electric actuator is the execution unit in industrial automation instrument, it receives from the regulator, PLC, DCS control signal from the computer, such as the completion of automatic adjustment, is indispensable to automatic control system for main equipment. It is widely used in power station, metallurgy, petroleum, chemical mine, light industry, pharmacy, gas power, building materials, transportation and city subway, water supply, sewage treatment and other industries.

Standard specifications

Housing	Waterproof level IP67, NEMA 4 and 6
Motor power supply	220V/1PH/50HZ 380V/3PH/50HZ
Motor	Squirrel-cage asynchronous motor
Limit switch	On/off, each of the 1 SPOT, 250V AC 10A
Auxiliary limit switch	On/ off, each of the 1 SPOT, 250V AC 10A
Torque switch	On I off, each of the 1 SPOT, 250V AC 1 OA	QT-010 Excluded
Travel	90°±10°	0°~ 270°Optional
Stall protection/ operating temperature	Built-in overheating protection, open 115℃ ±5℃/off 97℃ ±5℃
Indicator	Continuous position indicator scale
Manual operation	Mechanical clutch mechanism, with handwheel operation
Self-locking unit	Worm gear, self-locking provided for the worm mechanism
Mechanical limit	Two external adjusting bolts
Dryer	7-10W (110/220V AC)
Wiring hole	M201.5 M362
Ambient temperature	-20℃~+70℃
Lubrication	Aluminium-base grease (EP type)
Material	Steel/aluminum alloy/aluminum bronze/polycarbonate
Ambient humidity	Maximum 90% RH non-condensing
Seismic performance	X Y Z 10g, 0.2~34 Hz, 30 Minutes
Outer coating	Dry powder/epoxy polyester, with a superior anti-corrosion function

Optional specification

Color can be customized

Voltage can be customized

Mechanical position indicator

When the main power of the electric actuator is cut off, the valve opening can be displayed.

Protection level can be customized

IP 67

The standard configuration of the SD Actuator Controls has a sealing protection rating of IP 67 according to the EN 60 529 standard. Actuators with this standard seal protection rating can be submerged to a depth of 1 meter and operate for up to 30 minutes.

IP 68

The SD actuator controls are capable of improved sealing protection IP 68 according to EN 60 529. This grade can withstand submersion up to 6 meters, 72 hours of continuous placement, and 10 operations under water.

To ensure the requirements for sealing class IP 68, suitable cable glands are required. If the customer has a request, SD can provide it, but this is not part of the scope of supply of the standard configuration.

Corrosion protection can be customized

P1-Standard paint system

Aluminium castings go through a multi-stage cleaning and chrome-free surface conversion pre-treatment process to provide an excellent surface for powder coat to beapplied with strong adhesion.

The steel hand/auto lever is plated to apply a continuous unbroken sacrificial zinc alloy layer which ensures long term corrosion protection.

The iron base is submerged in zinc phosphate solution before being cold water rinsed.

All surfaces are then coated with an architectural grade

polyester powder coat with excellent exterior durability and colour retention.

P1 provides a hard coatingresistant to mechanical damage such as chips and scratches.P1 is optimised for inside or outside applications in normal onshore enviroments.

P2-Standard paint system plus offshore coating combination

Aluminium castings receive the same treatment as P1.

The steel hand/auto lever and iron base are both treated with the PX coating (detailed below).

P2 provides cost effective improvement to corrosion

protection optimised for coastal and marine applications.

Overall film thickness:

100 um for aluminiumcomponents

320 um for steel and iron components

PX-3 coat offshore wet paint system

All surfaces are abrasive blast cleaned before receiving two coats of high build epoxy,followed by a polyurethane top coat.

PX provides a high level of corrosion protection in harsh environments with a high durability.PXis designed for offshore and marine applications.

Below is a table showing the recommended FRY paint system for each environment.

Corrosivity category	Low(2-5 years)	Durability Medium(5-15yaers)	High (＞15 years)
C1	P1	P1	P1
C2	P1	P1	P1
C3	P1	P1	P1
C4	P1	P1	P2
C5-M-Marine	P1	P2	P2
C5-I-Indstial	P2	P2	PX

For reference,ISO 12944-2 category definitions are shown below

Corrosivity category	Typical environments-Exterior	Typical environments-Interior
C1	-	Heated buildings with clean atmospheres e.g. offices, shops, schools, hotels.
C2	Atmospheres with low levels of pollution. Mostly rural areas	Unheated buildings where condensation may occur, e.g. depots, sports halls.
C3	Urban and industrial atmospheres, moderate sulphur dioxide pollution. Coastal areas with low salinity.	Production rooms with high humidity and some air pollution, e.g. food processing plants, laundries, breweries, dairies.
C4	Industrial areas and coastal areas with moderate salinity.	Chemical plants, swimming pools, coastal ship and boatyards.
C5-M-Marine	Coastal and offshore areas with high salinity.	Buildings or areas with almost permanent condensation and with high pollution.
C5-I-Indstial	Industrial areas with high humidity and aggressive atmospheres.	Buildings or areas with almost permanent condensation and with high pollution.

Basic Specifications

Type	Torque	Voltage	Speed	Install method	Control method	Special function	code description of each part
OA	Output torque						Working torque,digital representation,unit:Nm
AS		K					Single phase 220V.AC 50Hz
BS		F					Three phase 380V.AC 50Hz
A+RS		Power supply					Rating travel time(90°),digital representation,unit:S
B+RS			Travel time	H			Foot-plate installation
				Z			Directly mounted installation
				Ccontrol method	G		Standard integration proportional modulating,4-20mA
					Y		Remote controlled, on-off input
					N		Intelligent, 4-20mA imput
					C		Main line
					Ccontrol method	P	With machine operating
						Ex	Explosion-proof
						----T	Special requirements: high, low temperature, working voltage, dimension, travel, etc.

Quarter Turn Electrical Consumption Data

Type	Out put force	Torque Nm	Full Travel time	Flange equipment		Foot mounting		motor		(Load rate 50%)
	work	maximum		outside view	net weightkg	outside view	spherical hinge	rate of work Kw	revolving speed rpm	rated current	starting current
OA10K OA10F	100	150	25	picture	11	picture	SQJ-10	0.025	1500	1.00	2.00
								0.025		0.35	1.20
AS25K AS25F	250	375	30		22		SQJ-25	0.065	1500	1.20	2.60
								0.065		0.90	1.80
BS60K BS60F	600	1000	30		32		SQJ-60	0.16	1500	2.20	4.50
								0.16		1.50	3.00
A+RS100K A+RS100F	1000	1400	30		48		SQJ-100	0.25	1500	2.60	5.60
								0.25		2.00	6.00
B+RS160K B+RS160F	1600	2000	40		76		SQJ-160	0.4	1400	3.40	7.50
								0.4		1.80	5.90
B+RS250K B+RS250F	2500	3000 3200	40		78		SQJ-250	0.4	1400	3.40	7.50
								0.4		1.80	5.90
B+RS400K B+RS400F	4000	4000 4800	65		86		SQJ-400	0.4	1400	3.40	7.50
								0.4		1.80	5.90
B+RS600K B+RS600F	6000	6000 6000	105		92		SQJ-600	0.55	1400	3.40	9.60
								0.4		2.50	7.50
B+RS800F	8000	9600	105		137		SQJ-800	0.65	1400	2.50	9.60
B+RS1000F	10000	12000	125		137			1.1		2.50	9.60
B+RS1200F	12000	14000	125		137			1.1	1400	2.80
B+RS1400F	14000	15600	125		137			1.1	1400	2.80

Advantage

FRY is a specialized company that has been producing electric actuators and related products that drive industrial valves since 2014 ,FRY produces product lines that can be applied in various fields,ranging from water treatment such as water supply and sewage to power generation and petrochemical fields, and sells them to customers all over the world.

FRY has a 3Q philosophy to fulfill customer needs.

Quick Delivery

FRY honors delivery dates and proposes the fastest delivery time possible.

Quick Service

FRY operates service organizations and systems to take action as quickly as possible if a problem occurs related to our product.

Quick Response

FRY works to give our customers a sense of trust by responding to customer requests as soon as they are received.

Status of major certification acquisition