Z10 electric valve Actuator
Applicable to gate valves, globe valves, diaphragm valves, etc.
Electric valve actuator
Material: Aluminum housing
Model: Z10
Power supply voltage: 380V 220V
Ambient temperature: -20~60°C
Protection level: IP67
Rated operating time: 15min
· Non-intrusive design, simple and intuitive debugging
· Chinese and English language options for the operation interface
· Slow valve closing function
· Self-diagnosis and adaptive function
· Fault diagnosis function during operation
· Protection grade IP67
· Accurate and reliable stroke and torque measurement
· Password lock function for control status
· Comprehensive data recording
· Automatic phase sequence correction function
· Motor overheat protection
Working Environment
1. Ambient temperature: -20~60C Optional ambient temperature: -40~70C
2. Relative humidity: ≤90% (25C)
2.3 Protection level: IP67
2.4 Explosion-proof mark: Exd1, ExdIBT4 and ExdICT4 are in hazardous places with explosive flammable gas of level IB~IC in Zone 1 or Zone 2, temperature group T1~T4. The motor is short-time working system with a rated running time of 15 minutes. F-class insulation.
Check whether the power supply voltage meets the requirements on the nameplate.
The user must provide appropriate electrical protection equipment (such as circuit breakers, air switches or fuses) to protect the electric actuator; there is an M8 grounding bolt on the external box of the electric actuator to connect the internal and external grounding; make sure to cut off the power before removing the wiring cover.
Cable entry
The cable seal and entry should comply with international standards or be approved by an authority with certification qualifications. Cable sealing shrink tubes, plugs and adapters should use certified qualified products;
The cable entry connection thread of the electric actuator is pg21x1, pg16x2. The cable model and size used for wiring should be suitable for the cable entry. To ensure waterproofing, tighten the cable sealing tube (at least 5 turns) and plug it with thread sealant; If the cable sealing tube has been removed, put the removed parts at the cable entry back to their original position to avoid loss;
Unused cable entries should be plugged with threaded steel or copper sealing plugs.
Hot Tags: Electric Actuator Russian Standard Flange ISO5211, China, manufacturers, suppliers, factory, buy, price, quotation, Modulating Valve Actuator, Pneumatic Actuator Butterfly Valve, Multi Turn Electric Actuators, Gate Valve Actuator, Electric Valve Actuator, Electric Actuator For Bernard
