Cast Steel Gas Flat Gate Valve With Diversion Hole

Cast Steel Gas Flat Gate Valve With Diversion Hole
Details:
Overview
High-pressure flat gate valve with diversion hole is a valve device suitable for opening, closing and regulating the flow of control media in water, oil, mud and natural gas pipelines with working pressure ≤ 42MPa and working temperature ≤ 120°C. Flat gate valve has reasonable structure, reliable sealing and easy operation. The sealing surface is spray-welded with carbide, which has the advantages of anti-corrosion, wear resistance, erosion resistance, etc., and can be used for throttling. It is especially suitable for use as opening, closing and regulating devices to control the flow of media in water, oil, mud and natural gas pipelines with working pressure ≤ 42MPa and working temperature ≤ 120°C.
Send Inquiry
Description
Send Inquiry

flat gate valve with diversion hole

product-464-309

 

Overview

High-pressure flat gate valve with diversion hole is a valve device suitable for opening, closing and regulating the flow of control media in water, oil, mud and natural gas pipelines with working pressure ≤ 42MPa and working temperature ≤ 120°C. Flat gate valve has reasonable structure, reliable sealing and easy operation. The sealing surface is spray-welded with carbide, which has the advantages of anti-corrosion, wear resistance, erosion resistance, etc., and can be used for throttling. It is especially suitable for use as opening, closing and regulating devices to control the flow of media in water, oil, mud and natural gas pipelines with working pressure ≤ 42MPa and working temperature ≤ 120°C.

 

Product features

1. Our factory has absorbed domestic advanced technology and experience and made improvements. The valve has a reasonable structure, reliable sealing, and easy operation and maintenance.

2. Flat gate valves are divided into two types: those with diversion holes and those without diversion holes. The valves with diversion holes are used on pipelines that need to be cleaned, and the valves without diversion holes are used on pipelines that do not need to be cleaned.

3. The gate plate and valve seat are treated with special technology, spray-welded with hard alloy, and the sealing surface is inlaid with PTFE, which has double sealing of PTFE to metal and metal to metal. At the same time, PTFE has the function of removing dirt from the gate plate. It can also be filled with grease to provide double protection for auxiliary sealing, ensuring reliable sealing and longer service life of the valve.

4. Compared with traditional gate valves, flat gate valves have the advantages of small switching torque and flexible opening and closing.

5. This valve has a triple adjustable packing structure to ensure reliable sealing with the valve cover and valve stem.

6. Regulating flat gate valves are used on pumps, station outlets and other pipelines that need to regulate media to regulate and cut off the media.

7. The valve is equipped with a pressure relief device to prevent damage to the valve due to pressure increase in the hall and ensure the safe use of the valve.

8. The Wb type flat gate valve without diversion holes has a unique structure, is convenient for sewage discharge, is not restricted by on-site inspection, and can be installed at any angle.

9. Wp type flat gate valve is light in weight and small in size, which greatly reduces the pipeline load. It is especially suitable for oil and steam storage devices.

10. The pneumatic flat gate valve opens and closes quickly, has a buffer mechanism, and closes without impact. The pneumatic and manual switching structure is novel, and the operation is flexible, convenient and reliable.

 

Parts material name

Valve body, valve bonnet:WCB/Chrome-molybdenum steel

Valve plate: Alloy steel/Hard alloy

Valve stem: Stainless steel

Valve seat: Alloy steel/Hard alloy

Valve stem nut: Aluminum bronze

Packing: PTFE

 

Installation instructions

1: The automatic water replenishing valve can be installed horizontally or vertically, but cannot be inverted, that is, the plastic knob cannot be on the upper part.

2: Watch the outlet pressure gauge and adjust the hexagonal copper nut on the top until the required operating system pressure is reached.

3: It is recommended that the pressure of the automatic water replenishment valve be set 0.3 kg higher than the static pressure, but the set value needs to be lower than the water replenishment pressure, otherwise the water replenishment will not be normal.

4: The automatic water filling valve automatically fills water to the set pressure, and the water filling time is longer.

5: If you need to interrupt the automatic water replenishment, you can manually close the stop valve on the automatic water replenishment valve.

6: If the valve core is dirty, you can replace or clean the valve core.

 

Preparation specifications

The design and manufacturing of valves are in accordance with JB/T5298-91 and API6D. The structural length of the valve is in accordance with GB12221-89, JB/T5298 and API 6D. Flange connection dimensions are in accordance with JB79, HGJ46, SH3406 and ANSI B16.5. The welding groove size shall be in accordance with GB12224, ANSI B16.25 and user requirements. The inspection and testing of valves are in accordance with the regulations of GB/T13927 and API598

product-471-403

Product standards

Design standards: JB/T5298, APl6D

Structural length: flange GB/T 12221, JB/T 5298 Welding GB/T 15188.1

Connecting flange GB/T9113, JB/T 79 ANSL 16.5a Butt welding end GB/T 12224

Testing and inspection GB/T3927, JB/T 9092

Scope of application

Nominal pressure: PN10.0~42.0MPa

Nominal diameter: DN25~200mm

Applicable temperature: -29~121℃

Applicable media Ordinary type: oil, natural gas, refined oil products, water, etc.

Sulfur-resistant type: petroleum, natural gas, refined oil products, water, etc.

Petroleum and natural gas containing H2S, CO2, etc.

Connection form: flange end, welding end, clamp end

Driving mode: manual, electric, pneumatic, etc.

 

Characteristics

1. The sealing structure of the valve seat should be elastic and pre-tightened, with the upstream and downstream sealing seats sealed at the same time. There is always a face-to-face seal between the valve seat and the seal.

2. The valve seat has a self-cleaning function and is not directly washed by air flow during the opening or closing process of the valve. The valve seat should be made of lubricated, non-abrasive material.

3. Failure of the valve actuator will not affect other parts of the valve, and repair and replacement work can be performed without dismantling the valve.

(1) Yoke Bushing – Aluminum bronze yoke bushing equipped with needle thrust bearings to minimize operating torque.

(2) Stem – threaded length to bracket; pinned and spot welded; for stability.

(3) Pressure Seal – Simple construction with segmented retaining ring and silver-plated mild steel gasket to facilitate disassembly and achieve the best bonnet seal. (4) Seat Ring – The welded seat ring is perpendicular to the flow path for easy maintenance.

(5) Actuator – These valves can be equipped with electric, hydraulic or pneumatic actuators. Below DN300, it is equipped with a standard manual handwheel, and above DN350, it is equipped with a helical gear operating mechanism.

(6) Yoke – Fully assembled yoke passes seismic testing and is easy to maintain and install the actuator.

(7) Gland – Two-piece, self-adjusting gland to prevent ejection.

(8) Integral rear seat – hard surface for longest life.

(9) Disc – The spring-loaded disc is self-adjusting, reducing torque requirements on the actuator.

(10) Integral stop – The integral cast bracket stop device positions the assembled bracket valve disc, making the valve seat more stable and reliable.

product-465-340

 

Hot Tags: cast steel gas flat gate valve with diversion hole, China, manufacturers, suppliers, factory, buy, price, quotation

Send Inquiry