PNEUMATIC ANSI STAINLESS STEEL BALL VALVE
PRODUCT STRUCTURE
ANSI stainless steel valve body
Precision casting: valve body is integrally formed, inner wall is mirror polished (Ra≤0.6μm), flow resistance is reduced, and medium residue is eliminated.
Flange end face: RF raised flange/FF flat welding flange is optional, sealing face is clad with STL carbide, and the erosion resistance life is increased by 3 times.
Pneumatic actuator system
Actuator type: double acting/spring return (single acting) is optional, and standard interface is supported.
Intelligent control: integrated IP67 protection positioner, supports 4-20mA/Modbus signal feedback, and opening accuracy is ±0.5%.
Metal seal/soft seal dual solution
Metal seal: tungsten carbide ball + Stellite valve seat, temperature resistance 450C, pressure resistance
Class600, zero leakage (ANSIVI grade).
Soft seal: PTFE+graphite composite valve seat, -196C ultra-low temperature seal, FDA food grade certification.
TECHNICAL PARAMETERS
Design standard ASME B16.34, API 608
Pressure level Class150/300/600
Valve body material 304/316L stainless steel (optional duplex steel)
Connection method RF flange, butt welding (BW), thread (NPT)
Applicable media Steam, strong acid/alkali, liquefied gas, food slurry
Leakage level ANSI VI (soft seal), IV (hard seal)
Gas source pressure 0.4~0.7MPa (customizable high pressure type)
SOLVE INDUSTRY ISSUES
Chemical Industry
Challenges: Highly corrosive media such as chlorine-alkali and sulfur recovery can easily cause valves to rust and fail.
Solution: 316L stainless steel valve body + metal seal, passed NACE MR0103 standard, corrosion-resistant.
Food and Pharmaceuticals
Challenges: High media hygiene requirements, cross contamination must be avoided.
Solution: Mirror polishing + full bore design.
Ocean
Challenge: High salt spray environment accelerates metal oxidation and seals are prone to failure.
Solution: Ultra-low carbon stainless steel + EPDM sealing ring.
SELECTION
Confirm the media type: corrosive/non-corrosive, particulate content.
Determine the operating parameters: pressure, temperature, flow requirements (full bore or reduced bore).
Select the actuator: single-acting/double-acting, explosion-proof level, signal feedback requirements.
Adapter flange standard: match the national standard/American standard/German standard according to the pipeline interface.
Hot Tags: 150lb pneumatic ball valve fluid pressure control, China, manufacturers, suppliers, factory, buy, price, quotation, Explosion Proof Electric Actuator, Electric Actuated Butterfly Valve, Electric Valve, Controls Electric Actuator For Bernard, Control Valve Actuator, Electric Valve Actuator
