WF-130M WF-S Position Transmitter Control Module

WF-130M WF-S Position Transmitter Control Module
Details:
·Input voltage range: AC210V~AC255V
·Output 4~20mA signal is photoelectrically isolated (can withstand 2000V surge voltage)
·Operating temperature range: -25℃~80℃
·Accuracy: 5‰
·Load resistance range: ≤750Ω
Position transmitter options WFM-P, WF-01, WF-M, WF-130, WFM-01
Send Inquiry
Description
Send Inquiry

Control Module

product-400-311

 

 

Product specifications

Product features:

·Input voltage range: AC210V~AC255V

·Output 4~20mA signal is photoelectrically isolated (can withstand 2000V surge voltage)

·Operating temperature range: -25℃~80℃

·Accuracy: 5‰

·Load resistance range: ≤750Ω

Position transmitter options WFM-P, WF-01, WF-M, WF-130, WFM-01

 

Common debugging method

Front: The travel limit mechanism has been adjusted before leaving the factory, especially the quarter-turn electric actuator does not allow the cam group to be adjusted. Cam debugging method: 4 cam pieces of different colors and numbers are installed in the cam mechanism. Turn the actuator handwheel to make the valve close, adjust the screw slot No. 1 (2) (depending on the on-site usage and model), push down and turn the cam piece in the closing direction until the cam just presses the closing (opening) direction travel switch. Then turn the handwheel in the opposite direction to make the valve fully open, align the screwdriver with the No. 3 (4) adjustment screw slot, push down and turn the cam piece in the opening direction until the cam just presses the opening (closing) direction travel switch (depending on the on-site usage and model). The adjustment of the mid-distance switch is similar to that of the travel switch.

Step 2: Check whether the wiring is correct. Turn the handwheel to turn the actuator to the center position.

Step 3: Turn on the power supply and adjust the phase sequence.

Step 4: Measure the output of each contact.

Step 5: If it is ZPF-09, you need to adjust WF-01 so that the actuator output is 4-20mA.

 

 

product-563-290

 

Control Board & Accessories

product-484-539

 

Company History

 

2014 Our company was registered in a rental house at the same time,the foreign trade department was established.

2015 The office address was changed to:Zhongbei Town Energy Saving Building this year our company has done 9000 certification CE certification and other qualification certifications, and the main export countries are southeast Asia, Parkistan Vietnam,Singpore and Thailand.

2016 The foreign trade business gradually increased exporting to South America Chile, Paraguay, Russia and other countries at the same time on the previous basis.

2020 Our company independently developed electric actuator sand applied for utility model patents and appearance patent certificates. The domestic and foreign trade business has grown rapidly,and the domestic trade department has been shortlisted as a fixed supplier for large enterprises such as Sinoma.Red Lion and Huaxin etc.The foreign trade department has been shortlisted as a fixed supplier for large enterprises such as Sinoma.Red Lion and Huaxin etc.The foreign trade department has undertakenmajor projects such as large-scale sewage treament.

2021 The annual sales volume of our companys electric actuators has approached 2,000units At the same time the following export qualifications have been handled:ROHS SILATEX etc,among them,the explosion-proof products have also passed the certification of the National Institute of Explosion-proofing.The main products have also passed the authoritative quality.

 

Status of major certification acquisition

product-502-559

 

Hot Tags: wf-130m wf-s position transmitter control module, China, manufacturers, suppliers, factory, buy, price, quotation, High Torque Electric Actuator, Gate Valve Actuator, Electric Actuated Gate Valve, Quarter Turn Ball Valve, Electric Gate Valve, Temperature Control Valve

Send Inquiry