ABSOLUTE ENCODER
CORE ADVANTAGES
Absolute position zero loss
Multi-turn mechanical gear set + electronic counting, supports up to 4096 turns of recording
No need to reset after power failure, read the real position after power on
Micron-level repeatability
Single-turn resolution 0.002°, repeatability accuracy ±0.005°
Built-in temperature compensation, -40°C~85°C full temperature range error <0.01%
Industrial-grade anti-interference
Aluminum alloy housing + IP67 protection, resistant to vibration 50g/impact 100g
Double shielding design for signal lines, EMC complies with EN 61000-6-4
Intelligent diagnostic function
LED status indicator (power/signal/fault)
Overload warning: output alarm signal when torque changes suddenly
TECHNICAL PARAMETERS
Item Absolute encoder
Resolution 17bit (single turn)/16bit (multi-turn)
Output signal SSI, 4-20mA, RS485 (optional)
Maximum speed 6000rpm
Working voltage DC5-30V (wide voltage design)
Protection level IP67 (dustproof and waterproof)
Mechanical life >100 million rotations
Bearing load Radial 50N/Axial 30N
Installation method Hollow shaft (Φ6-20mm)/flange installation
APPLICATIONS
Long-distance pipeline emergency shut-off valve position feedback
Support HART protocol superimposed valve position signal
DIP switch to set resolution and protocol type
Zero position calibration via PC software (supports online compensation)
LED red light: check the power supply voltage/signal line short circuit
Data jump: check whether the shielding layer is grounded reliably
SELECTION GUIDE
Resolution selection
Conventional control: 12bit (4096 steps/turn)
Precision adjustment: 17bit (131072 steps/turn)
Protocol matching suggestions
PLC system: PROFIBUS-DP is preferred
IoT project: Modbus RTU + JSON transparent transmission module
FAQ
Q: What are the advantages compared with incremental encoders?
A: Absolute encoders do not require reference points and are resistant to power failure/vibration interference, making them particularly suitable for safety-critical applications.
Q: Can the original encoder of an old actuator be replaced?
A: We provide shaft bushing adapters and protocol converters, and more than 90% of models can be directly replaced.
Hot Tags: micron-level repeatability absolute encoder, China, manufacturers, suppliers, factory, buy, price, quotation
