Electric Actuator
RCEL006-250 - The strong choice - Up to 2,450 Nm - Even EEx
Indicator
For visual indication of end position
EEx- design without dome
Limit Switches
2 potential-free Switches
2 limit-position Switches
Space Heater
Prevents condensation
Torque Switches
Open/Closed position
(RCEL015-250
Screws
External screws
stainless steel
Highest Surface Finish
Centrifugally cast aluminium Externally and internally anodized Dry Powder Epoxy painted
Motor
Fully enclosed Quiet operation Thermal motor protection
Connection
Vibration-safe plinths
No special tools
needed
Manual Override Hand Wheel
Manually
employed and automatically declutched
Self-locking gears
Mechanical breaks
not needed
Permanently lubricated
Dimensions RCEL005 - 005L
Dimensions RCEL006 - 250
Accessories
Adaptation
A driving bush is delivered as a standard with all actuators, for customers own adaptation or adapted as below.
RCEL 005-005L: 14 mm, ISO 5211 and DIN 79 RCEL 006-019: 22 mm, DIN 79
RCEL 028-050: 32 mm, DIN 79
RCEL 060-100: 42 mm, DIN 79
RCEL 150-250: 75 mm, DIN 79 Rotork Sweden has blueprints of more than 6,000 different valves for manufacturing valve adaption kits.
Rotork Sweden also offers adapted driving bushes according to customer requirements.
Mounting kit, console and driving bush
When direct mounting is not possible.
Standard design according to ISO 5211 and DIN 3337.
Measurements F07, F10, F12, F14, F16.
Individually adapted to valves according to customer specifications
Mounting actuator on valve
Rotork Sweden offers mounting of the actuator onto the valve.
The complete unit is calibrated and test run prior to delivery.
PIU. Potentiometer kit
For modulating actuators.
Continually monitors the actuator position throughout the full rotation motion.
PIU is built into the actuator at factory.
Can also be mounted later.
Available to RCEL005L, RCEL006-250 and EEx-actuators.
Mounting details are enclosed.
Operating panel
Customized control panel.
Accessories
PCU DHC-100D.
Digital modulating card.
Resolution: 450 points per 90° movement.
Is mounted in the actuator at delivery if requested, can also easily be mounted later.
Input signal: 4 - 20 mA, 0 - 5V and 0 - 10V.
Easily calibrated with buttons on the front panel.
Simple configuration of all parameters.
Optional rotation direction.
Adaptable control function continually modulating the load of the electric actuator.
Safety function for overloading (detection).
Faulty signal indicated by flashing LED.
Eliminates overload through operation-time protection.
Programmable function wrong input signal open, stop or close.
Can be combined with transmitter type OTX-100 or OTR-100 for return signal 4 - 20 mA.
For 1-phase 230 V, not for EEx-actuators or actuator RCEL005 with low cover.
OTX-100.
Transmitter for return signal.
Return signal: 4 - 20 mA. Simple installation.
Plugged directly into PCU DHC-100D. Eliminates extra wiring.
Easily calibrated with buttons on the PCU DHC-100D.
Voltage or current output can be adjusted to optional range within 0 - 10 V DC with steps of 0,0016 V or within 0 - 20 mA with steps of 0,0031 mA.
OTX-100 can be mounted at a later point in time.
For 1-phase 230 V, not for EEx-actuators.
OTR-100.
Transmitter for return signal and faulty information.
Return signal: 4 - 20 mA.
Simple installation.
Plugged directly into PCU DHC-100D.
Eliminates extra wiring.
Easily calibrated with buttons on the PCU DHC-100D.
Voltage or current output can be adjusted to optinal range within 0 - 10 V DC with steps of 0,0016 V or within 0 - 20 mA with steps of 0,0031 mA. Relay outputs, 2 pcs programmable + 1 pc for faulty function alarm.
OTR-100 can be mounted at a later point in time.
For 1-phase 230 V, not for EEx-actuators.
Advantages with RCEL actuators from Rotork Sweden
Strength:
"Power Start" delivers higher torque during the start.
Consultation worldwide.
Technical support from specialists, and direct customer support.
Service / spare parts from factory.
Training in the factory or at the customer's location.
Safety:
CE labelled. Approval CSA –UL. ATEX (option).
RCEL006-250.
Self locking gear.
Manual override wheel in case of power loss.
(RCEL006-250) Allen key for manual operation. (RCEL005-005L) 4
Limit Switches as standard, of which 2 pcs are potential free.
Thermal motor protection. (Not for 24VDC).
Mechanical end of travel stops.
Vibration-safe plinthsCE labelled.
Approval CSA –UL. ATEX (option). RCEL006-250.
Self locking gear.
Manual override wheel in case of power loss.
(RCEL006-250) Allen key for manual operation. (RCEL005-005L) 4
Limit Switches as standard, of which 2 pcs are potential free.
Thermal motor protection. (Not for 24VDC).
Mechanical end of travel stops.
Vibration-safe plinths
Delivery:
Fast deliveries from warehouse in Falun, Sweden.
Delivery inspection of all Actuators.
Unattached Actuators have basic settings at delivery. Actuators mounted on valves are calibrated before delivery
Warranty:
1 year warranty
Mounting:
Compact dimensions on the Actuators.
Remote Control has blueprints for the manufacturing of more than 6000 different valve adaption kits.
Customer adapted special applications.
Mounting Kits: International standard ISO 5211, DIN 79 and DIN 3337.
Material Quality:
Centrifugally cast aluminium.
Exterior and interior anodized.
Dry powder painted.
Fully enclosed, low noise motor.
Built-in heater preventing condensation. Stainless steel.
Hot Tags: Quarter-turn Intelligent Electric Valve Actuator, China, manufacturers, suppliers, factory, buy, price, quotation, 4 20ma Valve Actuator, Linear Electric Actuator For Rotork, 220v Butterfly Valve Electric Actuator, Explosion Proof Electric Actuator, Electric Quarter Turn Actuator, Explosion Proof Butterfly Valve Actuator
