Mainly Function and Features
Quarter-turn electric actuator scope of turning 0-90 degree,The output torque is indicated by Nm,Adjusting the output arm on any position according to open -closed degree of valve.Convenient to operation.
1.Signal interruption protection function.
2.Over torque protection function.
3.Mechanical and electric double limit switch travel protection function.
4."Remote auto / remote manual / local" three states can be switched, and with on-site electric operation, field hand wheel operation functions.
5.Positive and negative effects conversion function.
6.Prevent the motor run-down, with the dynamic electrical braking function.
7.High performance servo motor,Can be frequently start without heat.
8.Variety of control modes: Can be received standard current signal , Passive contact signal and Bus Signals.
9.Supply voltage can be produced according to user requirements.
10.Has strong anti-interference ability.
11.Optional three-phase power phase loss protection function and automatic correction phase.
Model Preparation Method
Type | Torque | Voltage | Speed | Install method | Control method | Special function | Code description of each part |
OA | Output torque | Working torque,digital representation,unit:Nm | |||||
AS | K | Single phase 220V.AC 50Hz | |||||
BS | F | Three phase 380V.AC 50Hz | |||||
A+RS | Power supply | Rating travel time(90°),digital representation,unit:S | |||||
B+RS | Travel time
| H | Foot-plate installation | ||||
Z | Directly mounted installation | ||||||
Ccontrol method | G | Standard integration proportional modulating,4-20mA | |||||
Y | Remote controlled, on-off input | ||||||
N | Intelligent, 4-20mA imput | ||||||
C | Main line | ||||||
Ccontrol method | P | With machine operating | |||||
Ex | Explosion-proof | ||||||
----T | Special requirements: high, low temperature, working voltage, dimension, travel, etc. |
Travel Time Can Be Customized
Type | Out put force | Torque Nm | Full Travel time | Flange equipment | Foot mounting | Motor | （Load rate 50%） | ||||
work | maximum | outside view | net weightkg | outside view | spherical hinge
| rate of work Kw | revolving speed rpm | rated current | starting current | ||
OA10K OA10F | 100 | 150 | 25 | picture | 11 | picture | SQJ-10 | 0.025 | 1500 | 1.00 | 2.00 |
0.025 | 0.35 | 1.20 | |||||||||
AS25K AS25F | 250 | 375 | 30 | 22 | SQJ-25 | 0.065 | 1500 | 1.20 | 2.60 | ||
0.065 | 0.90 | 1.80 | |||||||||
BS60K BS60F | 600 | 1000 | 30 | 32 | SQJ-60 | 0.16 | 1500 | 2.20 | 4.50 | ||
0.16 | 1.50 | 3.00 | |||||||||
A+RS100K A+RS100F | 1000 | 1400 | 30 | 48 | SQJ-100 | 0.25 | 1500 | 2.60 | 5.60 | ||
0.25 | 2.00 | 6.00 | |||||||||
B+RS160K B+RS160F | 1600 | 2000 | 40 | 76 | SQJ-160 | 0.4 | 1400 | 3.40 | 7.50 | ||
0.4 | 1.80 | 5.90 | |||||||||
B+RS250K B+RS250F | 2500 | 3000 3200 | 40 | 78 | SQJ-250 | 0.4 | 1400 | 3.40 | 7.50 | ||
0.4 | 1.80 | 5.90 | |||||||||
B+RS400K B+RS400F | 4000 | 4000 4800 | 65 | 86 | SQJ-400 | 0.4 | 1400 | 3.40 | 7.50 | ||
0.4 | 1.80 | 5.90 | |||||||||
B+RS600K B+RS600F | 6000 | 6000 6000 | 105 | 92 | SQJ-600 | 0.55 | 1400 | 3.40 | 9.60 | ||
0.4 | 2.50 | 7.50 | |||||||||
B+RS800F | 8000 | 9600 | 105 | 137 | SQJ-800 | 0.65 | 1400 | 2.50 | 9.60 | ||
B+RS1000F | 10000 | 12000 | 125 | 137 | 1.1 | 2.50 | 9.60 | ||||
B+RS1200F | 12000 | 14000 | 125 | 137 | 1.1 | 1400 | 2.80 | ||||
B+RS1400F | 14000 | 15600 | 125 | 137 | 1.1 | 1400 | 2.80 | ||||
Electric Actuator Color Can Be Customized
High Temperature Split Customization
High temperature can damage the circuit board and motor of the electric actuator. In the face of this situation, the solution is to make the electric actuator into a separate type, or directly add an extension rod to the actuator and valve, with the continuous innovation of electric actuator technology, different types and models of electric actuators adapted to various environments play an important role in the power production process. The application of split electric actuators is a typical case. The split type electric actuator can work in high temperature and high humidity environment, it has the significance of application and promotion. The application of this technology achieves the purpose of long-term stable operation of the electric actuator established during the technological transformation in a special environment.
The implementation of the split transformation of the electric actuator mainly includes the preparation of the split control box, the split control box and the actuator connection, actuator debugging and other parts.
First make a split control box, in the control box, to assemble all kinds of electronic components to achieve the control requirements, components, operation buttons, feedback instructions, remote local switch handles, etc. are installed on the control box panel device. If there is a requirement to prevent water ingress, a split control box with a higher protection level can be set, and a split control box can be set.
It can be designed and assembled by itself, or it can be outsourced for processing and production according to functional requirements. According to the site conditions, after fixing the control box, complete the preparation of the control box.
Wire Cable length and diameter
Transformer Model | Length (m) | Diameter of single wire(mm² ) | ||
100VA 24VAC | 50 | 2 | ||
100 | 3.5 | |||
250VA 24VAC | 50 | 3.5 | ||
100 | 6 | |||
500VA 24VAC | 50 | 10 | ||
100 | 20 |
Main technical parameters
Input signal：4-20mA impedance 250 Ω，0-10mA impedance 200 Ω
Dead area (sensitivity)：0.3-3% Continuous adjustable
Input channel：one analog current input channel , one set of switch volume channel .
Output channel：4-20mA DC impedance > 50 Ω. The input channel is isolated from the output channel.
Output torque and travel.
Linear-turn: 2000N-25000N travel 10、16、25、40、100mm
Quarter-turn: 100-40000Nm travel 90°
Multi-turn： 40-400Nm travel 1-50 circle
Basic error：±1%;±1.5%
Return difference:≦ ±1%
Damping characteristics:No oscillation (zero period oscillation)
Level of proection: IP67
Operation environment:
1. Temperature: -28--+70
2.Humidity: ≦95%
3.Shake: frequency 10-100Hz strenth, 0.5 times of acceleration of gravity
4.Impact: <5g
5. Barometric pressure：72.5-106KPa
The non-corrosive gas media in the surrounding air must not be used in inflammable and explosive places.(The explosion-proof products can be found in my company's explosion-proof products’sample.)
Voltage and power supply
220V--±10%50Hz
Single phase:220V--±10%50Hz
380V--±10%50Hz
Three phase: 380V--±10%50Hz
*Special voltage, frequency needs to be customized in advance.
Advantage
FRY is a specialized company that has been producing electric actuators and related products that drive industrial valves since 2014 ,FRY produces product lines that can be applied in various fields,ranging from water treatment such as water supply and sewage to power generation and petrochemical fields, and sells them to customers all over the world.
FRY has a 3Q philosophy to fulfill customer needs.
Quick Delivery
FRY honors delivery dates and proposes the fastest delivery time possible.
Quick Service
FRY operates service organizations and systems to take action as quickly as possible if a problem occurs related to our product.
Quick Response
FRY works to give our customers a sense of trust by responding to customer requests as soon as they are received.
Status of major certification acquisition
Hot Tags: High temperature split quarter-turn electric actuator, China, manufacturers, suppliers, factory, buy, price, quotation, Flow Control Valve Actuator, Electric Linear Actuator 24v, High Torque Linear Actuator, Remote Control Valve Actuator
