The actuator of a multi-turn electric actuator usually uses liquid or electrical energy to be transmitted through a specific device, and converts it into a drive to produce a linear or rotational motion. Multi-turn electric actuators can perform automated and precise work as long as they are connected to a signal. At present, the market demand for multi-turn electric actuators on the market is large, and there are many occasions for use. This shows several characteristics of multi-turn electric actuators.
1. The power source is very stable to ensure the smooth operation of the equipment
The main device that provides energy for multi-turn electric actuators is the electric motor. Depending on the function of the multi-turn electric actuator, the types of motors used are different. For example, some use single-phase and some use three-phase AC motors. However, all kinds of electric motors can provide a stable power source for the corresponding multi-turn electric actuators, which makes their work smoother.
2. Unique mechanical properties can greatly improve mechanical efficiency
Since the multi-turn electric actuator is equipped with a reducer to reduce the mechanical operation speed of the equipment, the mechanical speed of the multi-turn electric actuator can always be maintained at a constant state. This design can protect the equipment well and allow the efficiency of the machine Significant improvement.
3, the installed protection device can protect the torque of the equipment in the normal range
Multi-turn electric actuator is equipped with a protection device, so it can be guaranteed that the torque value will always be within the normal range. This design is to avoid accidentally adjusting the torque when it is worthwhile to manually adjust the torque. Once the error protection device is found, the torque can be immediately returned to the normal range.
The multi-turn electric actuator has a very smooth power source, and the unique mechanical performance also greatly improves the mechanical efficiency of the equipment. The important thing is that the protection device of the multi-turn electric actuator can ensure that the value is accidentally adjusted when the equipment is adjusted. Will not cause damage to the equipment.
