If the opening and closing speed of the valve is too fast, water hammer is prone to occur. Therefore, the appropriate opening and closing speed should be selected according to different conditions of use.
Valve electric devices (such as electric butterfly valves) have special requirements, that is, they must be able to limit torque or axial force. Generally, valve electrical devices use torque-limiting couplings. When determining the specifications of electrical equipment, the control torque is also determined. Generally, if the motor runs within a predetermined time, the motor will not be overloaded.
In the past, fuses, overcurrent relays, thermal relays, and thermostats were used to protect motors, but these methods have their own advantages and disadvantages. For the variable load equipment of electrical equipment, there is no completely reliable protection method. Therefore, it is necessary to adopt various combinations, which can be summarized in two ways: one is to judge the increase or decrease of the input current of the motor; the other is to judge the increase or decrease of the input current of the motor. The other is to judge the warm state of the motor itself. Either way, the time margin given by the motor thermal capacity should be considered.

