1. Main features of the actuator
1.1 The actuator is designed with a servo system (no additional servo amplifier is required), and it only needs to connect to DC4~20mA (or DC1~5V) signal and AC220V single-phase power supply to work. Built-in terminal block, wiring is extremely simple and convenient.
1.2 The key component of the actuator, the controller, adopts advanced hybrid integrated circuits, is sealed and cast with resin, and has a box-like shape, small size and high reliability.
1.3 The feedback detection of driving quantity adopts high-performance conductive plastic potentiometer, and the resolution is less than 0.4%.
1.4 With self-diagnosis function, when a fault occurs, the indicator light on the controller will immediately send out an indication signal.
1.5 The state selector switch can be used to set the off signal (the valve core is in the fully open, fully closed or self-locking state).

