News

If the electric valve is controlled in the control room, turn the transfer switch to the large REMOTE position, and then control the electric valve...

The installation position, height, and inlet and outlet direction must meet the design requirements.

The electric valve is mainly composed of two parts: the valve and the electric actuator. The electric device adopts an electric actuator.

The electric valve is usually connected by an electric actuator and a valve, and is installed as an electric valve.

With the development of electric valves, there are many well-known companies at home and abroad. Nowadays, electric butterfly valves are more and m...

From the above we know that electric butterfly valves are divided into handle butterfly valves and turbine butterfly valves

The most common driving methods for butterfly valves are manual, pneumatic, hydraulic and electric. This article mainly introduces electric butterf...

First find the vibration source, the oscillation caused by the external, should make the control valve away from the vibration source; eliminate or...

Valve electric devices have special requirements that must be able to limit torque or axial forces. Usually the valve electric device uses a torque...

Operating torque: Operating torque is the most important parameter for selecting the valve's electric device. The output torque of the electric dev...

The electric device of the electric valve is an indispensable device for realizing valve program control, automatic control and remote control, and...

The electric valve is usually connected by an electric actuator and a valve, and is installed as an electric valve.