If the fine and small electric actuator is used frequently, it may be damaged due to the increase of temperature, and it needs to be properly lubricated regularly. The lubricants used include lubricating products such as oil, butter and graphite. However, when the small electric actuator is in a high temperature state, two lubricants, butter and oil, cannot be used, because its low melting point will be melted by the high temperature of the small electric actuator and cannot cause lubrication effect. At this time, graphite can be used. powder. For parts exposed to the outside, if butter or oil is used, it will easily cause dust, so it is more appropriate to use graphite powder.
Precautions for the purchase of fine and small electric actuators
At the same time, it is also necessary to ensure the cleanliness of the outer layer of the fine and small electric actuators and the frequent working modules. The purpose is to protect the paint on the fine and small electric actuators from rubbing during the operation process, resulting in incomplete paint. The dust accumulated on the fine electric actuator can be swept away with a brush or blown away with compressed air; the trapezoidal threads and the dirt accumulated in the gear need to be wiped with a rag, and the oil stained by the fine electric actuator can be used Steam purge. Until the machined surface emits a bright metallic color and the painted surface shows the true color of the paint.
