1. Installation method
1) The installation position of the electric actuator should meet its use requirements, such as explosion-proof electric actuators installed in flammable and explosive places:
2) The installation of the electric actuator should meet its design requirements, such as protection level, installation angle, etc.:
3) The installation of the electric actuator should ensure structural strength to avoid safety hazards.
2. Maintenance
Regular maintenance is an important measure to ensure the normal operation of the electric actuator.
1) Timely replace the lubricating oil, seals and other wearing parts of the electric actuator.
2) Regularly check the transmission parts, electrical components, etc. of the electric actuator to ensure normal operation:
3) To prevent the electric actuator from stagnating for a long time, regular trial operation and maintenance should be carried out.
3. Troubleshooting
1) The electric actuator does not work
a. Check whether the power supply and cable connection are normal
b. Manually turn the output shaft first to confirm whether the electric actuator is normal;
c. Check whether the controller is faulty or not connected,
2) The electric actuator is abnormal when working
a. Check whether the motor and transmission part have abnormal sounds:
b. Check whether the controller is set correctly or whether the program is wrong
c. Check whether the cable is loose or damaged.
